Aristo
Optional driver that already includes the Print and Cut Module (PCM). It allows cutting on Aristo Precision-Cutting tables (SL, TL, GL and LFC series) which are controlled by the CutterControlPanel. By assigning different spot colors to the specific tools, also multiple tool paths and multiple tool workflow is easy accessible. The tables must be equipped with the »AutomaticEye« option, to be able to synchronize the registration marks of the printing artwork with the tool path.

COMAC Comagrav
Optional driver that includes already the Print and Cut Module (PCM). It allows cutting on COMAC Comagrav CNC machines which are controlled by the COMAC PILOT software suite. Barcodes of type Code39 or QR Code can be placed individually around the job. Via a hot folder interface the HP/GL based *.plp files are provided. Multiple spot colors in an input file can be used.

Elitron KOMBO Series
Optional driver that already includes the Print and Cut Module (PCM). It allows cutting on Elitron KOMBO series flatbed cutters via XML cutting files. You can select multiple spot colors from the job file, which will be used for different tools. For large cutting objects, additional markers are available to ensure accurate alignment. Barcodes (Code39) can be placed individually for any requirement.

GCC (Puma III, Jaguar IV)
Driver included in the optional Print and Cut Module (PCM). It allows controlling of GCC Puma III and Jaguar IV roll cutters and supports AAS-II synchronization mark detection (AAS-II’s 4-point). Additional synchronization marks in media transportation direction allow an accurate cut. Multiple spot colors from the job file can be used for a convertion to cut data each in a separate layer. Additionally the perforation cut is possible. This function is useful to be able to separate the motif from the media later on.

Graphtec (CE, FC)
Driver included in the optional Print and Cut Module (PCM). It allows controlling of Graphtec roll cutters via ColorGATE CutServer software. Beside common settings such as velocity and force the perforation cut is possible. This function is useful to be able to separate the motif from the media later on. Further, you can specify what suitable tool to be used for cutting.

Mimaki CF2 Series
Optional driver that already includes the Print and Cut Module (PCM). It allows controlling Mimaki flatbed cutting tables of CF2 Series. You can use the ColorGATE CutServer software to send cut data to the cutter. Both size and distances between synchronization marks can be defined for optimal recognition. Further, you can specify what suitable tool to be used for cutting.

Mimaki CFL Series
Optional driver that already includes the Print and Cut Module (PCM). It allows controlling Mimaki CFL-605RT flatbed cutting tables. You can use the ColorGATE CutServer software to send cut data to the cutter. Size of synchronization marks can be defined for optimal recognition. Further, you can specify what suitable tool to be used for cutting.

Mimaki FX Series
Driver included in the optional Print and Cut Module (PCM). It allows controlling of Mimaki roll cutters of FX series. You can use the ColorGATE CutServer software to send cut data to the cutter. Beside common settings such as velocity and force the perforation cut is possible. This function is useful to be able to separate the motif from the media later on.

MultiCam
Optional driver that already includes the Print and Cut Module (PCM). It allows cutting on MultiCam CNC-Tables, equipped with a MultiVison Camera as Digital Registration System. The cut path and the synchronization marks are extracted as bézier curves in the AI format to the machine software (Job Editor from ExtraTech). Settings like velocity, acceleration or tool force are applied with the "Machine Parameters" module, they cannot be set by this driver.

Mutoh ValueCut
Driver included in the optional Print and Cut Module (PCM). It allows controlling of Mutoh ValueCut roll cutters. You can use the ColorGATE CutServer software to send cut data to the cutter. Beside common settings such as velocity and force the perforation cut is possible, too. This function is useful to be able to separate the motif from the media later on. Further, you can set a possible tool offset (distance center of tool to knife tip).

Roland CAMM-1 GR Series
Driver included in the optional Print and Cut Module (PCM). It supports the Roland CAMM-1 GR-420/540/640 large format cutters. To send cut data to the device, you can use ColorGATE CutServer software or Roland CutStudio. Beside common settings such as velocity and force, the GR series supports a fast internal perforation cutting mode. Cut data is not fragmented by the driver, instead the device optimizes speed and accuracy of the perforation. Also, cut paths can be processed with up to 8 different 'Cutting Condition' settings via device parameter sets.

Summa F Series
Optional driver that already includes the Print and Cut Module (PCM). It allows controlling the Summa F Series digital flatbed cutting devices. Special synchronization marks will be used to synchronize the print-out and the cut data with the F Series Pro Flatbed system. Barcode types of Code39 and PostNet are supported.

Zünd Touch&Cut
Optional driver that already includes the Print and Cut Module (PCM). It allows creating cut data for digital flatbed devices that are equipped with the Touch&Cut System (Zünd Company). Zünd Touch&Cut allows the spot color assignment to specific tools. By printing barcodes automatically assures a correct job processing also in terms of an orientation.The Zünd Touch&Cut System with integrated camera, which is required for that function, is not included.